Stronger Together, Forged in Adventure

DIY Skater Trainers: Step Up Your Skate Game

Introduction: Making Your Own DIY Skater Trainers

Skateboarding is not just a sport, it’s a way of life. But mastering the art of skateboarding is no easy feat. It requires time, dedication, and most importantly, practice.

skateboard

One of the biggest challenges for beginner skateboarders is mastering balance and control. This is where skater trainers come in.

For those not familiar with skater trainers, they are small plastic devices that attach to the wheels of a skateboard to prevent them from rolling freely. This creates a stable and controlled platform for beginners to practice basic skateboarding tricks such as ollies and kickflips without the fear of falling off the board or losing control.

While store-bought skater trainers can be effective, they can also be costly, especially for beginners who are just starting out. This is why making your own DIY skater trainers can be a cost-effective alternative that not only saves money but also allows you to customize your equipment to suit your individual needs and preferences.

The Problem with Store-Bought Skater Trainers

Firstly, let’s talk about store-bought skater trainers. While they may seem like an easy solution for beginners looking to improve their skills, there are several downsides to consider before making a purchase. For starters, store-bought skater trainers can be quite expensive compared to other skateboard accessories.

Depending on the brand and quality, prices can range anywhere from $20-50 or more per set. For beginners who may need multiple sets for different boards or family members wanting to learn together, these costs can add up quickly.

Another problem with store-bought skater trainers is that they may not always fit properly on every type of skateboard wheel or deck size. This means that you could end up purchasing an expensive set of trainers only to find out they don’t work well with your specific board, resulting in wasted time and money.

The Benefits of DIY Skater Trainers

So, why bother with making your own DIY skater trainers? For one, it’s a fun and creative project that allows you to customize your equipment to suit your personal style and needs.

Plus, you’ll be able to make as many sets as you need for a fraction of the cost of store-bought trainers. Another benefit is that DIY skater trainers can be easily adjusted to fit any size or type of wheel.

You can create a custom fit for your specific skateboard deck by using materials that are readily available at hardware stores or online retailers. Overall, making your own DIY skater trainers is not only cost-effective but also an enjoyable way to enhance your skateboarding skills while expressing your creativity.

So why not give it a try? Skateboarding is all about pushing boundaries and breaking the mold – so why not do the same with your equipment?

Materials Needed

There are a few essential materials that you will need to make your own DIY skater trainers. First on the list is a pair of old sneakers that you don’t mind cutting up.

Preferably, these should be shoes with good ankle support, as your safety is of the utmost importance when skating. You’ll also need PVC pipe, which can be purchased at any hardware store.

Make sure to get a diameter that matches your shoe size so that it fits snugly. Next, you’ll need duct tape and an exacto knife or box cutter.

It’s important to have sharp blades to ensure clean cuts and reduce the risk of injury. You may also want to have scissors on hand for cutting the duct tape.

Tools of the Trade

Now, for the fun part – “Tools of the Trade.” This is where you can get creative and add some humor into the process. While not all of these items are strictly necessary for making DIY skater trainers, they can certainly add some personality and flair to your project. First up: a lucky rabbit’s foot for good luck!

Just don’t tell PETA about it… Next on our list is a picture of Tony Hawk for inspiration – because who wouldn’t want to channel their inner skateboarding legend? A disco ball may seem out of place in a workshop, but who says you can’t jam out while crafting?

And finally, we have a magic wand – because hey, why not? If anyone questions its usefulness in constructing skater trainers, just tell them it’s for casting spells that make you better at skating.

In all seriousness though, while these items may not be necessary for the actual construction of the trainers, having a bit of fun and creativity can make the process more enjoyable. Plus, who knows – maybe that magic wand will actually work…

Step-by-Step Instructions

Materials needed:

  • 4 tennis balls
  • Utility knife or sharp scissors
  • Marker or pen
  • Cutting board or surface

Step 1: Prepare the tennis balls

  • Take each tennis ball and mark a straight line around its circumference, approximately 1 inch from the bottom.
  • Repeat this process for all four tennis balls.

Step 2: Cut the tennis balls

  • Place a tennis ball on a cutting board or surface.
  • Using a utility knife or sharp scissors, carefully cut along the marked line, creating a half-circle opening on the bottom of the tennis ball.
  • Repeat this process for the remaining three tennis balls.

Step 3: Install the DIY skater trainers

  • Flip your skateboard upside down, exposing the wheels.
  • Slide one cut tennis ball onto each wheel of the skateboard, ensuring that the open side of the tennis ball faces downward.
  • Push the tennis balls down firmly, so they fit snugly onto the wheels.

Step 4: Test and adjust

  • Carefully turn your skateboard right-side up, with the tennis balls now touching the ground.
  • Stand on the skateboard with one foot, ensuring your weight is distributed evenly.
  • Practice balancing on the skateboard, feeling the stability provided by the DIY skater trainers.
  • If the trainers feel too loose or wobbly, remove them and make additional cuts on the tennis balls to create a tighter fit. Alternatively, add an extra layer of tape around the wheels for added stability.

The Moment of Truth: Testing Your DIY Skater Trainers

Now comes the moment of truth – testing out your newly-made skater trainers for the first time! This is where all your hard work pays off (or falls apart). First things first – put on your skate shoes and attach your skater trainers by sliding them onto your wheels until they fit securely in place.

once you get comfortable with them, you’ll be able to practice new tricks without worrying about falling off or damaging your board. Plus, since you made them yourself, you can customize them to your liking and feel even more confident on your board.

Making your own DIY skater trainers is a fun and cost-effective way to enhance your skateboarding skills. With this step-by-step guide, you’ll be able to create your own trainers and test them out with ease.

So what are you waiting for? Get to work and start shredding like a pro!

Skate Like a Pro

Did you know that some famous skateboarders have used homemade equipment in their careers? Tony Hawk himself has admitted to making his own skateboards early on in his career before he became sponsored by major companies. Using DIY skater trainers could give you an edge on your competition just like these pros!

In addition, making your own equipment shows innovation and creativity – two qualities valued highly in skateboarding culture. By thinking outside of the box and coming up with your own solutions for training aids, you’ll earn respect from other skaters who appreciate ingenuity.

Taking on the challenge of creating your own DIY skater trainers can be both cost-effective and fulfilling. By following these tips and tricks for construction, as well as drawing inspiration from famous skateboarders who have used homemade gear themselves, you’re sure to end up with high-quality skater trainers that will help you improve your skills and stand out in the skateboarding community.

Conclusion

Recap of Benefits of Making Your Own DIY Skater Trainers

In the world of skateboarding, there’s nothing quite like the feeling of landing a difficult trick. However, mastering new moves takes time and practice.

Skater trainers can be a valuable tool for skateboarders looking to improve their skills, but they can also be expensive. That’s where DIY skater trainers come in.

By making your own skater trainers, you’ll not only save money, but you’ll also gain the satisfaction that comes with building something yourself. While making your own DIY skater trainers may seem intimidating at first, it’s actually a rewarding experience that allows you to customize your training equipment to meet your specific needs and preferences.

Not only that, but creating something with your own hands gives a sense of accomplishment that simply can’t be matched by buying pre-made equipment. By following our step-by-step instructions and tips and tricks, there’s no doubt that you can create an effective set of skater trainers on your own.

Encouragement to Try it Out and Have Fun Skating!

If you’re looking for a cost-effective way to improve your skateboarding skills or just want to try out a fun new DIY project, we highly recommend making your own skater trainers. While it may take some time and effort to create them from scratch, the end result will not only help improve your skating abilities but will also provide a sense of pride in what you’ve created.

So what are you waiting for? Get started on creating your own set of DIY skater trainers today!

Not only will it save you money in the long run but it’ll give you an edge when mastering those tricky maneuvers on the board. Remember: practice makes perfect – so keep at it and have fun skating!

https://forgedventure.com/skater-trainers-review-the-ultimate-training-solution/

About Us

Skateboarding

At Forgedventure, we’re passionate about being active. Our blog is your go-to resource for all things adventure – from gear reviews to the best know-how, we’ve got you covered. Join us on our journey and discover the thrill of forging your own path in the great outdoors.

Featured Posts